EXPORT ONLY

COMPLETE 20 WATT PACKAGE INCLUDES:

1 x 20 Watt Stereo transmitter

1 x 3amp Universal Power Supply (90-260v)

1 x  MDR1 Broadband Antenna

1 x 50 feet LMR-240 coax cable and appropriate connectors

New enhanced version is out! CYBER MAX FM+ is the first from a line of rack mounted FM transmitter series for demanding broadcasters, operating in the whole band II, from 87.5 to 108 MHz (extended Japanese band can be ordered as well). Transmitter consists of a stereo encoder with pre-emphasis circuit, active low-pass filter, our professional series PLL synthesizer/exciter, 20W wideband no-tune RF output stage with SWR and temp protection and an optional mains power supply. Unit is housed in a professional 19" rack mount enclosure. It is rugged and made for 24/7/365 operation. Each unit has a wide-angle high contrast backlit LCD display. The best value for your money. Recommended for long term operation 15 watts.

Antenna works any frequency, no tuning required, comes with mast clamp, install in a matter of minutes to any pole/leg up to 4.5" diameter will handle up to 700 watts.

LMR240 is one of the best low loss coax cables on the market, 50 feet comes complete with BNC and N connector to match this system so you are ready to go in minutes.

General features:
- Standard 19" rack 1U high
- Modular construction
- Built-in CPU for controlling and monitoring
- Easy changing of frequency (UP/DOWN keys, no tuning required)
- Low distortion
- SWR protection
- SCA/RDS possible
- Friendly user interface
- Cost effectiveness
- Output power: 10-15W typ (up to 20W max.), adjustable from 0 to max via LCD
- Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
- Output connector BNC female ( rear panel )
- Frequency range 87.5 to 108MHz
- Smallest PLL step 6.25KHz (12.5/25/50/100 possible)
- Audio connectors: RCA (cinch) or XLR (DSP version)
- Audio level: 1Vpp
- Audio input impedance: 600 ohms resistive, unbalanced
- Pre-emphasis Flat, 50 or 75usec
- RF Spurious > -80 dBc @ +- 1MHz min. out of carrier
- RF Harmonics > -60 dBc Standard
- Monitoring Led: Power on, SWR/TEMP/PLL warning
- Harmonic distortion ( THD ) <0,1% ( 0,05% typ. )
- Channel separation 40 dB min., ( 55 dB typ. ), 20Hz to 15kHz
- Voltage power supply DC 15V/3A or mains
- External dimensions ( W x D x H ) 19" x depth (170mm) x height 1HE (44mm)
- Weight 2.5kg